Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1GD-FTV)
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261204 COMPRESSOR(for 1GD-FTV) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E321878

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E321879E07
0.521,1.198 1.052,1.198 false 0.25,1.115 0.635,1.302 0.385,0.188 10 false SST

a.

Clamp the cooler compressor assembly in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.