Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMBUSTION TYPE POWER HEATER SYSTEM
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261205 COMBUSTION TYPE POWER HEATER SYSTEM U

HEATING / AIR CONDITIONING  COMBUSTION TYPE POWER HEATER SYSTEM  TERMINALS OF ECU  


CHECK HEATER ASSEMBLY


U170565E02
3.448,0.281 3.729,0.438 0.281,0.156 10 false A97

a.

Measure the voltage, resistance and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A97-1 (E) - Body ground W-B - Body ground Ground for main power supply Always Below 1 Ω
A97-2 (L) - Body ground R - Body ground Heater pump operation signal Engine idling
Power heater switch on
Pulse generation
(See waveform 1)
A97-3 (IG) - Body ground W - Body ground Power heater operating signal Engine switch on (IG)
Power heater switch on
11 to 14 V
Engine switch on (IG)
Power heater switch off
Below 1 V
A97-5 (B) - Body ground B - Body ground Power source Always 11 to 14 V
A97-8 (+) - Body ground G - Body ground Engine operating signal Engine idling 11 to 14 V


b.
E130372E03
0.062,1.641 0.413,1.816 0.350,0.174 10 GND

Using an oscilloscope, check waveform 1.

Heater Pump Control Signal
Item Content
Terminal No. (Symbol) A97-2 (L) - Body ground
Tool Setting 2 V/DIV., 20 ms/DIV.
Condition Engine idling
Power heater switch on



CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


U149186E02
5.854,0.188 6.063,0.385 0.208,0.198 10 false z1 3.979,0.188 4.354,0.385 0.375,0.198 10 false G25 1.656,0.188 2.031,0.385 0.375,0.198 10 false G24

a.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G25-18 (HTR1) - G25-14 (GND) G - W-B Engine operating signal Engine idling 11 to 14 V