Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMBUSTION TYPE POWER HEATER SYSTEM
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261205 COMBUSTION TYPE POWER HEATER SYSTEM D

HEATING / AIR CONDITIONING  COMBUSTION TYPE POWER HEATER SYSTEM  DIAGNOSIS SYSTEM  


NOTICE:

The cause of problems (such as abnormal voltage, overheating, short circuits, component failure, etc.) can be checked by connecting the DTC tester and reading DTCs.


DTC CHECK/CLEAR


a.

Turn the engine switch off.


b.

Disconnect the A97 heater assembly connector.


c.

Connect connector A of the DTC tester to the vehicle wire harness.


d.

Connect connector B of the DTC tester to the heater assembly connector.


e.

Start the engine.


f.

Read the DTCs.

i.

Press the DTC call button to display 3-digit DTCs.



g.

Clear the DTCs.

i.

Press both memory clear buttons together for more than 2 seconds.

E124452E08
3.781,4.708 3.01,5.146 false 4.448,4.771 4.615,5.198 false 4.823,4.771 4.615,5.198 false 5.5,4.76 6.042,5.146 false 5.885,4.771 6.042,5.146 false 4.938,3.823 5.208,2.813 false 5.135,3.823 5.281,3.26 false 5.313,3.823 5.458,3.26 false 5.479,3.823 5.625,3.26 false 5.635,3.823 5.781,3.26 false 5.802,3.823 5.969,3.104 false 5.271,3.26 5.927,3.26 false 5.885,4.135 6.396,4.135 false 0.917,1.083 0.604,0.406 0.604,0.406 0.781,0.406 false 2.365,1.896 2.667,1.396 false 0.708,2.875 0.917,2.469 false 0.823,0.344 3.26,0.656 2.438,0.313 10 Connector B (Heater assembly side) 3.823,0.333 5.094,0.552 1.271,0.219 12 DTC Display: 3.417,3.01 4.531,3.229 1.115,0.219 12 Control Panel: 0.135,2.906 1.469,3.083 1.333,0.177 10 DTC Check Harness 5.792,1.031 6.479,1.24 0.688,0.208 10 Normal 5.792,2.094 6.75,2.292 0.958,0.198 10 Malfunction 2.365,5.219 3.583,5.427 1.219,0.208 10 DTC Calling Button 3.844,5.219 5.229,5.417 1.385,0.198 10 Memory Clear Button 5.594,5.219 6.813,5.427 1.219,0.208 10 DTC Calling Button 5.25,2.656 6.281,2.844 1.031,0.188 10 Current Display 5.99,2.969 6.823,3.125 0.833,0.156 10 Past Record 6.479,3.969 7.115,4.313 0.635,0.344 10 "Heating" Symbol 1.906,1.938 3.219,2.417 1.313,0.479 10 Connector A (Vehicle wire harness side)




DESCRIPTION OF DTC TESTER


HINT:

The DTC tester is able to store up to 5 DTCs in memory. If it is full, new data is written and the oldest DTCs are cleared.


Item Description
AF Current malfunction (Blinking in the event of a current malfunction)
DIAG DTC (Example: 064 Flame sensor malfunction)
DTC Call Button Reads the DTCs
Memory Clear Button Clears the DTC memory
DTC Memory Call Button (>) Cycles through the DTC memory (F1 - F5)
DTC Memory Call Button (<) Cycles through the DTC memory (F5 - F1)