Home › Vehicle Interior › POWER OUTLETS (INT) › VOLTAGE INVERTER (for 3 Door)
RM27T0E _58 Vehicle Interior _053740 POWER OUTLETS (INT) _0261207 VOLTAGE INVERTER(for 3 Door) G

POWER OUTLETS (INT)  VOLTAGE INVERTER(for 3 Door)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 86210A 1.INSPECT VOLTAGE INVERTER ASSEMBLY

HINT:

Remove interior parts so that the voltage inverter can be seen.


a.
U169754E01
0.226,0.616 0.562,0.789 0.336,0.173 10 GND 0.338,1.494 0.503,1.653 0.166,0.159 10 IG 1.115,1.37 0.647,0.708 false 1.107,1.576 0.55,1.571 false 0.086,0.059 0.266,0.236 0.180,0.176 10 *a 2.668,1.1 2.933,1.281 0.264,0.181 10 Q17

Disconnect the voltage inverter connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
Q17-5 (IG) - Q17-1 (GND) Engine switch on (IG) 11 to 14 V
Q17-1 (GND) - Body ground Always Below 1 V


If the result is not as specified, repair or replace the harness or connector.

Text in Illustration
*a Front view of wire harness connector
(to Voltage Inverter Assembly)


c.
U169755E01
0.185,0.958 0.474,1.115 0.289,0.157 10 AC1 0.398,1.554 0.693,1.716 0.295,0.161 10 AC2 1.012,0.706 0.521,1.042 false 1.406,0.951 0.774,1.646 false 0.096,0.07 0.295,0.231 0.200,0.161 10 *a 2.591,0.956 2.855,1.137 0.264,0.181 10 Q17

Reconnect the voltage inverter connector.


d.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
Q17-4 (AC1) - Q17-8 (AC2) Engine switch on (IG), main switch on AC 220 V


If the result is not as specified, replace the voltage inverter assembly.

Text in Illustration
*a Component with harness connected
(Voltage Inverter Assembly)