69370E
1.INSPECT BACK WINDOW LOCK ASSEMBLY
| *a | Component without harness connected
(Back Window Lock Assembly) |
*b | Moves to Open Position |
| *c | Closed Position | - | - |
Apply battery voltage to the back window lock motor and check the operation of the back window lock assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 3 (+)
Battery negative (-) → 4 (-) |
Open Position |
If the result is not as specified, replace the back window lock assembly.
Measure the resistance of the back window lock.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (+) - 1 (-) | Open Position | Below 1 Ω |
| Closed Position | 10 kΩ or higher |
If the result is not as specified, replace the back window lock assembly.