76893
1.REMOVE REAR NO. 1 SPOILER COVER
76893E
2.REMOVE REAR SPOILER COVER RH
76085
3.REMOVE REAR SPOILER SUB-ASSEMBLY
85241A
4.REMOVE REAR WIPER ARM
85110R
5.REMOVE REAR WIPER MOTOR ASSEMBLY
68940
6.REMOVE BACK WINDOW STAY ASSEMBLY LH
68930
7.REMOVE BACK WINDOW STAY ASSEMBLY RH
Use the same procedures described for the LH side.
68131
8.REMOVE BACK DOOR GLASS
Remove the connector and detach the 2 clamps.
Remove the 4 bolts and back window glass.
67891C
9.REMOVE BACK DOOR SEAL LH
Using a scraper, remove the back door seal LH.
Be careful not to damage the back door glass.
Be sure to replace the seal with new ones.
67891A
10.REMOVE BACK DOOR SEAL RH
Use the same procedure described for the back door seal LH.
68678
11.REMOVE BACK DOOR WINDOW PROTECTOR
Using a scraper, remove the back door window protector.
Be careful not to damage the back door glass.
Be sure to replace the protector with new ones.
69415E
12.REMOVE BACK DOOR LOCK STRIKER COVER
Using a moulding remover, detach the 3 claws and remove the lock striker cover.
69450D
13.REMOVE BACK WINDOW LOCK STRIKER ASSEMBLY
Remove the 2 nuts and lock striker.
64819B
14.REMOVE BACK WINDOW GLASS SPACER
Perform the following procedures if replacing the back window glass spacer.
Remove the back window glass spacer.
| *1 | No. 2 Back Window Glass Spacer |
| *2 | No. 1 Back Window Glass Spacer |
68820C
15.REMOVE BACK DOOR HINGE ASSEMBLY LH
Perform the following procedures if replacing any back door hinge assembly LH.
Using a T30 "TORX" wrench, remove the 2 screws and back door hinge.
68810D
16.REMOVE BACK DOOR HINGE ASSEMBLY RH
Use the same procedure described for the LH side.