Home › Vehicle Exterior › WINDOW / GLASS › GLASS HATCH OPENER SWITCH
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261224 GLASS HATCH OPENER SWITCH A

WINDOW / GLASS  GLASS HATCH OPENER SWITCH  INSTALLATION  


PROCEDURE

Hide 84947B 1.INSTALL SWITCH COVER

a.

Install the switch cover.


Hide 84840F 2.INSTALL GLASS HATCH OPENER SWITCH ASSEMBLY

a.

Install the opener switch with the screw.


Hide 76806 3.INSTALL LOWER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY LH

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Wipe off any tape with cleaner.



b.

Install a new outside garnish.

i.

Using a heat light, heat the vehicle body and garnish.


ii.

Remove the peeling paper from the face of the outside garnish.



c.

Attach the 5 claws to install the garnish.


d.

Install the screw.


e.

Attach the clamp and connect the connector.


Hide 76816 4.INSTALL LOWER BACK DOOR OUTSIDE GARNISH MOULDING LH

a.

Attach the 4 claws to install the outside garnish moulding.