Home › Vehicle Exterior › WINDOW / GLASS › RELAY (for Windshield Deicer)
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261235 RELAY(for Windshield Deicer) G

WINDOW / GLASS  RELAY(for Windshield Deicer)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84794A 1.REMOVE DEICER RELAY

a.

Remove the deicer relay from the engine room relay block.


Hide 84794A 2.INSPECT DEICER RELAY

B244733

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage not applied to terminals 1 and 2 Below 1 Ω
Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.


Hide 84794A 3.INSTALL DEICER RELAY

a.

Install the deicer relay to the engine room relay block.