Home › Vehicle Exterior › WINDOW / GLASS › RELAY (for Window Defogger)
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261236 RELAY(for Window Defogger) G

WINDOW / GLASS  RELAY(for Window Defogger)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85912 1.REMOVE DEFOGGER RELAY (DEFOG)

a.

Remove the defogger relay from the main body ECU (instrument panel junction block).


Hide 85912 2.INSPECT DEFOGGER RELAY

B060778E76
0.189,1.259 0.299,1.460 0.110,0.201 10 1 1.712,0.095 1.822,0.296 0.110,0.201 10 1 1.203,1.259 1.313,1.460 0.110,0.201 10 2 2.867,0.095 2.977,0.296 0.110,0.201 10 2 1.203,0.722 1.313,0.923 0.110,0.201 10 5 3.004,1.495 3.114,1.696 0.110,0.201 10 3 0.189,0.722 0.299,0.923 0.110,0.201 10 3 3.004,0.997 3.114,1.198 0.110,0.201 10 5 1.79,0.323 2.048,0.633 false 2.629,0.633 2.908,0.323 false 2.45,1.606 2.914,1.606 false 2.45,1.11 2.914,1.11 false 2.99,2.011 3.414,2.153 0.424,0.142

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.


Hide 85912 3.INSTALL DEFOGGER RELAY

a.

Install the defogger relay to the main body ECU (instrument panel junction block).