Home › Vehicle Exterior › WINDOW / GLASS › BACK WINDOW STAY
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261237 BACK WINDOW STAY N

WINDOW / GLASS  BACK WINDOW STAY  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68940 1.DISPOSE OF BACK WINDOW STAY ASSEMBLY LH

a.
B239008E01
2.217,1.608 2.408,1.775 0.191,0.166 10 a 1.717,1.741 1.908,1.907 0.191,0.166 10 A 2.703,1.741 2.894,1.907 0.191,0.166 10 B 2.811,1.401 3.001,1.568 0.191,0.166 10 b

Horizontally secure the back window stay in a vise with the piston-rod pulled out.


b.

Wear safety glasses. Gradually cut an area between A and B shown in the illustration using a metal saw and gradually release the gas.

Standard:
Area Specified Condition
a 80 mm (3.15 in.)
b 20 mm (0.787 in.)


CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·

Cover the area being cut.



NOTICE:

The gas inside the back window stay is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back window stay with a piece of cloth or other material.