Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD DEICER SWITCH › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261240 WINDSHIELD DEICER SWITCH G

WINDOW / GLASS  WINDSHIELD DEICER SWITCH  INSPECTION  


PROCEDURE

Hide 84871 1.INSPECT OUTER MIRROR HEATER SWITCH ASSEMBLY

a.
B242863E02
1.906,1.271 2.229,1.521 true 1.448,1.292 1.146,1.531 true 1.292,1.26 0.906,1.302 true 1.604,1.281 1.396,1.698 true 1.76,1.271 1.865,1.688 true 2.26,1.5 2.469,1.667 0.208,0.167 10 false IG 1.021,1.563 1.188,1.729 0.167,0.167 10 false E 0.76,1.25 0.896,1.406 0.135,0.156 10 false D 0.083,0 0.333,0.26 0.25,0.26 10 false *a 1.281,1.719 1.667,1.896 0.385,0.177 10 false ILL+ 1.781,1.698 2.188,1.906 0.406,0.208 10 false ILL-

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 (IG) - 9 (E) Outer mirror heater switch on Below 1 Ω
6 (IG) - 9 (E) Outer mirror heater switch off 10 kΩ or higher


If the result is not as specified, replace the outer mirror heater switch assembly.


b.

Apply battery voltage to the connector and check the LED illumination.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 6 (IG)
Battery negative (-) → 10 (D)
Indicator LED illuminates
Battery positive (+) → 8 (ILL+)
Battery negative (-) → 7 (ILL-)
Illumination LED illuminates


Text in Illustration
*a Component without harness connected
(Outer Mirror Heater Switch Assembly)