Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0261241 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR DEFOGGER WIRE

U115514E01
2.979,1.999 3.406,2.131 0.427,0.132 2.084,0.206 2.334,0.383 0.250,0.177 10 *a 0.547,1.616 0.756,1.862 0.209,0.246 10 *b 2.718,1.409 2.946,1.619 0.228,0.209 10 *c 2.767,1.1 2.767,1.392 false 1.048,0.882 0.659,0.882 0.659,0.882 0.659,1.576 false 1.043,1.295 0.659,1.295 false 1.723,0.971 1.723,0.296 1.723,0.296 2.054,0.296 false

a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.

Text in Illustration
*a Repair Point
*b Masking Tape
*c Broken Wire


d.
U115516E01
1.369,0.352 1.747,0.352 false 1.117,0.228 1.315,0.431 0.198,0.203 10 *a 0.429,1.42 0.660,1.622 0.230,0.202 10 *b 3.007,2.04 3.414,2.131 0.407,0.092 1.449,0.963 0.527,0.963 0.527,0.963 0.527,1.392 false

Using a fine tip brush, apply a small amount of the agent to the wire.

Text in Illustration
*a Fine Tip Brush
*b Repair Point


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not allow electricity to flow in the defogger wire for at least 24 hours.