Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM › 2015.06–2016.08
RM27T0E _59 Vehicle Exterior _053743 SLIDING ROOF / CONVERTIBLE _0261242 SLIDING ROOF SYSTEM A

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Utility / Customize Setting.


e.

Select the setting by referring to the table below.

Slide Roof
Display Default Contents Setting
Door Key Related Open*1 ON The function to manually open the sliding roof linked with the power windows by holding the driver side door key for 2.0 seconds or more to the unlock position when the ignition switch is off. ON or OFF
Door Key Related Close*1 ON The function to manually close the sliding roof linked with the power windows by holding the driver side door key for 2.0 seconds or more to the lock position when the ignition switch is off. ON or OFF
Wireless Key Related Open*2 ON The function to manually open the sliding roof linked with the power windows by pressing the transmitter UNLOCK switch for 3.0 seconds or more when the ignition switch is off. ON or OFF
Wireless Key Related Close*2 ON The function to manually close the sliding roof linked with the power windows by pressing the transmitter LOCK switch for 3.0 seconds or more when the ignition switch is off. ON or OFF
Door Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by holding the driver side door key for 2.0 seconds or more to the unlock position when the ignition switch is off. Slide or Tilt
Wireless Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by pressing on the transmitter UNLOCK switch for 3.0 seconds or more when the ignition switch is off. Slide or Tilt

NOTICE:
·

*1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.

·

*2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.