Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF HOUSING
RM27T0E _59 Vehicle Exterior _053743 SLIDING ROOF / CONVERTIBLE _0261243 SLIDING ROOF HOUSING A

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF HOUSING  REASSEMBLY  


PROCEDURE

Hide 63205A 1.INSTALL SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

a.
B236472

Hold down the window deflector.

NOTICE:

Make sure that the spring indicated by the arrow in the illustration is securely installed.



b.
B236473E01
1.714,0.686 1.933,0.879 0.219,0.193 10 *1 2.932,1.254 2.108,0.769 2.108,0.769 1.936,0.769 false

Using a screwdriver, slide the drive cable in the direction indicated by the arrow in the illustration to install it.

Text in Illustration
*1 Protective Tape
V100135

Slide

HINT:

Tape the screwdriver tip before use.



c.
B236474E01
1.832,3.235 2.155,3.486 0.323,0.252 10 *a

Slide the rear roof drip channel forward and attach the 2 claws to install it.

Text in Illustration
*a Forward


d.

Install the 2 stoppers with the 2 screws.

B236467


Hide 63205A 2.ADJUST SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

B236475E01
0.785,0.334 1.250,0.662 0.465,0.328 10 *1 0.785,0.782 1.323,1.116 0.538,0.334 10 *2 2.288,0.794 1.339,0.409 1.339,0.409 1.034,0.409 false 2.315,0.993 1.252,0.873 1.252,0.873 1.038,0.873 false 1.03,1.231 1.301,1.475 0.271,0.245 10 *3 0.568,2.899 0.568,1.312 0.568,1.312 0.995,1.312 false

Text in Illustration
*1 Matchmark A
*2 Matchmark B
*3 Protective Tape

a.

Using a screwdriver, align the matchmarks by sliding the drive cable in the directions indicated by the arrow in the illustration.

HINT:

Tape the screwdriver tip before use.



Hide 63229A 3.INSTALL SLIDING ROOF SUNSHADE STOPPER LH

a.
B178631

Install the stopper.


Hide 63229A 4.INSTALL SLIDING ROOF SUNSHADE STOPPER RH

HINT:

Use the same procedure described for the LH side.


Hide 63306 5.INSTALL SUNSHADE TRIM SUB-ASSEMBLY

a.

Insert the sunshade trim into the sliding roof housing.

B236477E01
3.38,1.768 3.673,2.070 0.293,0.302 10 *a

Text in Illustration
*a Forward - -


b.

Attach the 4 claws to install the sliding roof piece LH and RH.


c.

Install the 2 screws.


Hide 63260A 6.INSTALL SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

a.

Install the drive gear with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


b.
B236463

Attach the bracket claw to install the bracket.