85110R
1.INSPECT REAR WIPER MOTOR ASSEMBLY
Check the wiper continuous operation.
Check that the rear wiper motor assembly operates when the battery voltage is applied between the terminals.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) → 5 (B)
Battery negative (-) → 2 (LS) Battery negative (-) → 3 (E) |
Motor operates at low speed (LO) |
If the result is not as specified, replace the motor assembly.
| *a | Component without harness connected
(Rear Wiper Motor Assembly) |
Check the wiper intermittent operation.
Check that the rear wiper motor assembly operates when the battery voltage is applied between the terminals.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) → 5 (B)
Battery negative (-) → 4 (C1) Battery negative (-) → 3 (E) |
Rear wiper motor operates intermittently |
If the result is not as specified, replace the motor assembly.
| *a | Component without harness connected
(Rear Wiper Motor Assembly) |