85110R
1.INSPECT REAR WIPER MOTOR ASSEMBLY
Operate the rear wiper motor assembly.
The wiper motor does not operate if the back door and back door glass are not closed.
Stop the rear wiper motor assembly operation.
Align the blade tip with the mark on the glass as shown in the illustration.
| *A | w/o Back Door Tire Carrier |
| *B | w/ Back Door Tire Carrier |
| *1 | Ceramic Dot |
| *a | Upper Limit |
| *b | Lower Limit |
Check the automatic stop position.
After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
| Area | Specified Condition |
|---|---|
| a | 10 mm (0.394 in.) |
| b | 10 mm (0.394 in.) |