Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261262 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.

Attach the claw to install the windshield wiper switch assembly.


b.

w/ Rain Sensor:

Connect the connector.


c.

w/o Rain Sensor:

Connect the 2 connectors.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.

Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

a.

Attach the 2 claws to install the lower steering cover.


b.

for Power Tilt and Power Telescopic:

Install the screw.


c.

Turn the steering wheel to the right and left as necessary to install the 2 screws.


Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).