Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Rear Side)
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261264 WASHER MOTOR(for Rear Side) G

WIPER / WASHER  WASHER MOTOR(for Rear Side)  INSPECTION  


PROCEDURE

Hide 85330F 1.INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY

a.

Disconnect the rear washer motor and pump assembly connector.

HINT:

Make sure that the rear washer motor and pump assembly is installed to the windshield washer jar assembly.



b.

Fill the windshield washer jar assembly with washer fluid.


c.
E197536

Connect the positive (+) lead of the battery to terminal 1 of the rear washer motor and pump assembly, and the negative (-) lead to terminal 2.


d.

Check that washer fluid flows from the windshield washer jar assembly.

OK:

Washer fluid flows from the windshield washer jar assembly.


If the result is not as specified, replace the rear washer motor and pump assembly.