85035
1.INSPECT WASHER NOZZLE SUB-ASSEMBLY
With the engine running, check the position that the washer fluid hits the windshield.
Washer fluid hits the windshield in the areas shown in the illustration.
| *1 | Ceramic Line | - | - |
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | - | - |
|
Washer Fluid Spray Area | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 78 mm (3.07 in.) | B | 213 mm (8.39 in.) |
| C | 158 mm (6.22 in.) | D | 124 mm (4.88 in.) |
If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.