Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261266 WASHER NOZZLE(for Rear Side) G

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85035R 1.INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/ Back Door Tire Carrier)

a.

With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

Standard:

Washer fluid hits the windshield in the area shown in the illustration.


E200708E01
3.297,0.264 3.492,0.453 0.195,0.189 10 A 3.769,0.485 3.964,0.649 0.195,0.164 10 B 6.107,1.109 6.302,1.298 0.195,0.189 10 C 6.386,1.974 6.581,2.138 0.195,0.164 10 D 6.623,2.102 6.818,2.266 0.195,0.164 10 E 3.688,3.713 3.883,3.903 0.195,0.189 10 G 2.831,3.713 3.026,3.903 0.195,0.189 10 H 0.452,2.12 0.647,2.309 0.195,0.189 10 I 0.683,1.15 0.878,1.339 0.195,0.189 10 J 3.767,3.919 3.962,4.083 0.195,0.164 10 F

Standard:
Area Specified Condition Area Specified Condition
A 30.5 mm (1.20 in.) B 28.3 mm (1.11 in.)
C 50.9 mm (2.00 in.) D 455.5 mm (17.9 in.)
E 500.1 mm (19.7 in.) F 146.1 mm (5.75 in.)
G 84.6 mm (3.33 in.) H 420.5 mm (16.6 in.)
I 496.4 mm (19.5 in.) J 35.9 mm (1.41 in.)


HINT:

If the result is not as specified, replace the rear washer nozzle.



Hide 85035R 2.INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/o Back Door Tire Carrier)

a.

With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

Standard:

Washer fluid hits the windshield in the area shown in the illustration.


E200709E01
3.448,0.288 3.643,0.478 0.195,0.189 10 A 3.951,0.46 4.146,0.624 0.195,0.164 10 B 6.017,1.102 6.212,1.291 0.195,0.189 10 C 6.288,1.948 6.483,2.112 0.195,0.164 10 D 6.525,2.077 6.720,2.241 0.195,0.164 10 E 3.868,3.648 4.063,3.837 0.195,0.189 10 G 2.958,3.883 3.153,4.073 0.195,0.189 10 H 0.397,2.094 0.592,2.283 0.195,0.189 10 I 0.614,1.124 0.809,1.313 0.195,0.189 10 J 3.999,3.883 4.194,4.047 0.195,0.164 10 F

Standard:
Area Specified Condition Area Specified Condition
A 42.7 mm (1.68 in.) B 21.5 mm (0.847 in.)
C 65.5 mm (2.58 in.) D 426.6 mm (16.8 in.)
E 505.5 mm (19.9 in.) F 140.5 mm (5.53 in.)
G 3.6 mm (0.142 in.) H 412.8 mm (16.3 in.)
I 494.9 mm (19.5 in.) J 50.4 mm (1.98 in.)


HINT:

If the result is not as specified, replace the malfunctioning rear washer nozzle.