Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261269 HEADLIGHT CLEANER MOTOR G

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSPECTION  


PROCEDURE

Hide 85280A 1.INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

a.

Disconnect the headlight cleaner washer motor and pump assembly connector.

HINT:

Make sure that the headlight cleaner washer motor and pump assembly is installed to the windshield washer jar assembly.



b.

Fill the windshield washer jar assembly with washer fluid.


c.
E197534E05
0.409,0.056 0.595,0.223 0.185,0.167 10 *a

Connect the positive (+) lead of the battery to terminal 2 of the headlight cleaner washer motor and pump assembly, and the negative (-) lead to terminal 1.


d.

Check that washer fluid flows from the windshield washer jar assembly.

OK:

Washer fluid flows from the windshield washer jar assembly.


If the result is not as specified, replace the headlight cleaner motor and pump assembly.

Text in Illustration
*a Component without harness connected
(Headlight Cleaner Motor and Pump Assembly)