Home › Vehicle Exterior › WIPER / WASHER › RAIN SENSOR
RM27T0E _59 Vehicle Exterior _053746 WIPER / WASHER _0261270 RAIN SENSOR A

WIPER / WASHER  RAIN SENSOR  REMOVAL  


PROCEDURE

Hide 89943 1.REMOVE NO. 1 RAIN SENSOR COVER

a.
E197772

Detach the 2 claws and remove the rain sensor cover.


Hide 89941 2.REMOVE RAIN SENSOR

a.
E197773

Disconnect the connector.


b.
E179753E02
0.722,1.395 0.978,1.648 0.256,0.252 10 *1 2.3,1.667 2.571,1.837 0.271,0.169 10 (2) 1.115,1.923 1.385,2.092 0.271,0.169 10 (1) 0.912,1.483 1.075,1.483 1.075,1.483 1.296,1.593 false

Release the stopper by pulling it down.

Text in Illustration
*1 Stopper


c.

Remove the rain sensor as shown in the illustration.


Hide 56111 3.CLEAN WINDSHIELD GLASS

NOTICE:
·

The rain sensor tape can be reused, however, replace it with a new piece of tape if it is dirty or damaged.

·

Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.