Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261275 LIGHTING SYSTEM C

LIGHTING (EXT)  LIGHTING SYSTEM  B2452  Height Control Sensor Data Out of Range When Initializing  


DESCRIPTION

The headlight swivel ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the headlight swivel ECU; for example, the vehicle is not level or is being jacked up.

DTC Code DTC Detection Condition Trouble Area
B2452 The sensor value received from the height control sensor is out of range when performing initialization.
·

Vehicle condition when initializing

·

Headlight swivel ECU assembly



PROCEDURE

1.PERFORM INITIALIZATION
a.

Perform initialization of the headlight swivel ECU (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION).

HINT:
·

Before initializing, make sure that the vehicle condition is proper for initialization.

·

Be sure to perform the initialization as instructed.





NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC B2452 is not output A
DTC B2452 is output B

HINT:

If the headlight swivel ECU stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight swivel ECU.




A

END

B

REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY