81560
1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (STP)
Battery negative (-) → Terminal 4 (E) |
Illuminates |
| Battery positive (+) → Terminal 2 (TL)
Battery negative (-) → Terminal 4 (E) |
If the result is not as specified, replace the rear combination light assembly LH.
| *a | Component without harness connected
(Rear Combination Light Assembly LH) |
81550
2.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
Apply battery voltage to the connector and check the light illumination condition.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (STP)
Battery negative (-) → Terminal 4 (E) |
Illuminates |
| Battery positive (+) → Terminal 2 (TL)
Battery negative (-) → Terminal 4 (E) |
If the result is not as specified, replace the rear combination light assembly RH.
| *a | Component without harness connected
(Rear Combination Light Assembly RH) |