Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
52563D
1.REMOVE UPPER REAR BUMPER RETAINER LH
Detach the 2 guides and remove the upper rear bumper retainer LH.
81550L
2.REMOVE REAR TURN SIGNAL LIGHT BULB
Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.
Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly LH.
81550N
3.REMOVE BACK UP LIGHT BULB
Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.
Remove the back up light bulb from the rear combination light socket and wire sub-assembly LH.
81565
4.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH
Detach the 4 clamps.
Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to disconnect it.
Disconnect the connector and remove the rear combination light socket and wire sub-assembly LH.