Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261279 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Connect the connector.


b.
E201244

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.


c.

Attach the 4 clamps to install the rear combination light socket and wire sub-assembly LH.


Hide 81550N 2.INSTALL BACK UP LIGHT BULB

a.
E282719

Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.


b.
E198137

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E282717

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.


b.
E198138

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.


Hide 52563D 4.INSTALL UPPER REAR BUMPER RETAINER LH

a.

Attach the 2 guides to install the upper rear bumper retainer LH.