Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84010A
1.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55420A
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Display)
86120L
3.REMOVE NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)
84330
4.REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Display)
Using a screwdriver, detach the 4 claws and remove the hazard warning signal switch assembly.
84330
5.REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/ Display)
Disconnect the connector.
Using a screwdriver, detach the 2 claws and remove the hazard warning signal switch assembly.