84152
1.INSPECT HEADLIGHT LEVELING SWITCH
Connect the positive (+) lead of the battery to terminal 1 (B) and the negative (-) lead to terminal 4 (E).
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (B) - 2 (T) | 0 | 10.4 to 11.2 V |
| 1 | 8.52 to 9.24 V | |
| 2 | 6.6 to 7.32 V | |
| 3 | 4.68 to 5.4 V | |
| 4 | 2.76 to 3.48 V | |
| 5 | 0.84 to 1.56 V |
Apply battery voltage to the connector and check the LED illumination condition.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 3 (ILL+)
Battery negative (-) → Terminal 4 (E) |
LED illuminates |
If the result is not as specified, replace the headlight leveling switch.
| *a | Component without harness connected
(Headlight Leveling Switch) |