Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for LED Headlight) › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261295 HEADLIGHT ASSEMBLY(for LED Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for LED Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 52134J 1.INSTALL FRONT BUMPER BAR REINFORCEMENT LH

a.

Install the front bumper bar reinforcement LH with the 2 screws.


Hide 52134I 2.INSTALL FRONT BUMPER BAR REINFORCEMENT LH

a.

Install the front bumper bar reinforcement LH with the 2 screws.


Hide 85669 3.INSTALL HEADLIGHT LEVELING MOTOR BASEPACKING

a.

Install a new headlight leveling motor base packing to the headlight unit LH.


Hide 85662 4.INSTALL HEADLIGHT LEVELING MOTOR LH

a.

Hold the LED unit in place, and then push in the end of the headlight leveling motor LH to connect it to the LED unit and install the headlight leveling motor LH.

E283090E01
4.314,0.078 4.571,0.279 0.257,0.200 10 *1 6.003,0.135 6.260,0.335 0.257,0.200 10 *2 5.452,1.079 4.403,0.251 4.403,0.251 3.167,1.542 false 5.67,1.182 6.035,0.295 false

Text in Illustration
*1 LED Unit *2 End of Headlight Leveling Motor LH


b.
E283842

Rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration and attach the claw.

HINT:

For the headlight leveling motor RH, rotate it in the opposite direction of the arrow shown in the illustration to install it.



c.

Connect the connector.


Hide 81134 5.INSTALL HEADLIGHT GASKET

a.

Install a new headlight gasket to the headlight socket cover.


Hide 81144C 6.INSTALL HEADLIGHT SOCKET COVER

a.

Attach the guide to install the headlight socket cover.


b.

Install the screw.


Hide 81108 7.INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

a.

Connect the connector.


b.
E281070

Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to install it.


Hide 81510C 8.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.
E282551

Install the front turn signal light bulb to the front turn signal light bulb socket.


b.
E282549

Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to connect them as a unit.


Hide 81110D 9.INSTALL NO. 2 HEADLIGHT BULB

a.
E282547

Turn the No. 2 headlight bulb in the direction indicated by the arrow to install it.

NOTICE:

Do not touch the glass part of the bulb.



b.

Connect the connector.