When installing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, symbol emblem or back door name plate excessively.
75741E
1.INSTALL SYMBOL EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new symbol emblem.
Using a heat light, heat the vehicle body and a new symbol emblem.
Remove the peeling paper from the face of the symbol emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door name plate in the position shown in the illustration.
Press the symbol emblem firmly to install it.
| *a | Reference Values | *b | Back Door Relief |
| *c | Back Door End Line | - | - |
75441B
2.INSTALL BACK DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new back door name plate.
Using a heat light, heat the vehicle body and a new back door name plate.
Remove the peeling paper from the face of the back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door name plate in the position shown in the illustration.
Press the back door name plate firmly to install it.
| *a | Reference Values | *b | Back Door Relief |
| *c | Back Door End Line | - | - |