Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
76622D
1.REMOVE FRONT FENDER MUDGUARD LH
2.REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)
Remove the side step (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>SIDE STEP>REMOVAL).
75862A
3.REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR
Remove the 2 screws and No. 2 rocker panel moulding protector.
75852
4.REMOVE ROCKER PANEL MOULDING LH (for 5 Door)
Remove the 7 rocker panel moulding retainers and screw.
Put protective tape around the rocker panel moulding.
Remove the 2 screws.
Detach the 7 clips and remove the rocker panel moulding.
| *1 | Protective Tape | - | - |
75852
5.REMOVE ROCKER PANEL MOULDING LH (for 3 Door)
Remove the 6 rocker panel moulding retainers and screw.
Put protective tape around the rocker panel moulding.
Remove the screw.
Detach the 8 clips and remove the rocker panel moulding.
| *1 | Protective Tape | - | - |