67939B
1.REMOVE BACK DOOR CENTER GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
67761A
4.REMOVE BACK DOOR TRIM COVER
75202B
5.REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY
09120A
6.REMOVE TOOL CASE
64798
7.REMOVE BACK DOOR LOCK COVER
64780A
8.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
67847A
9.REMOVE BACK DOOR SERVICE HOLE COVER
69212
10.REMOVE BACK DOOR OUTSIDE HANDLE LH
76801
11.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Remove the nut.
Disconnect the connector.
Detach the clamp and disconnect the back door electrical key switch wire harness from the back door panel.
Put protective tape around the back door outside garnish sub-assembly.
| *1 | Protective Tape |
Using moulding remover B, detach the 19 clips and remove the back door garnish sub-assembly.
76812A
12.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH
Detach the 3 claws and 2 guides and remove the No. 2 back door outside garnish.