Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH (w/o Tire Carrier) › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261311 BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier) A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier)  REASSEMBLY  


PROCEDURE

Hide 76825 1.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

HINT:

When installing the back door outside garnish protector, heat the No. 2 back door outside garnish surface using a heat light.


Standard:
Item Temperature
No. 2 Back Door Outside Garnish 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the No. 2 back door outside garnish surface.

i.

Using a heat light, heat the No. 2 back door outside garnish surface


ii.

Remove the double-sided tape from the No. 2 back door outside garnish.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B353296E03
1.656,1.052 1.656,0.521 1.656,0.521 2.083,0.521 false 0.531,1.219 0.677,1.552 0.677,1.552 0.823,1.229 false 2.531,1.24 2.677,1.573 2.677,1.573 2.813,1.219 false 2.125,0.417 2.344,0.656 0.219,0.24 10 false *1 0.604,1.573 0.823,1.813 0.219,0.24 10 false *1 2.604,1.583 2.823,1.823 0.219,0.24 10 false *1

Install a new back door outside garnish protector.

i.

Using a heat light, heat the No. 2 back door outside garnish.


ii.

Remove the peeling paper from the face of the back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.

Text in Illustration
*1 Back Door Outside Garnish Protector




Hide 76825C 2.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

HINT:

When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B353297E03
0.573,1.583 0.573,1.865 0.573,1.865 0.927,1.865 false 2.198,1.656 2.198,1.938 2.198,1.938 2.552,1.938 false 0.958,1.771 1.25,2.01 0.292,0.24 10 false *1 2.594,1.823 2.885,2.063 0.292,0.24 10 false *1

Install a new back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish sub-assembly.


ii.

Remove the peeling paper from the face of the back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.

Text in Illustration
*1 Back Door Outside Garnish Protector




Hide 84945 3.INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

Hide 76826A 4.INSTALL NO. 1 BACK DOOR GARNISH RETAINER

a.

Install the No. 1 back door garnish retainer with the 3 screws.


Hide 81275A 6.INSTALL LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

a.

Connect the connector to install the license plate light cord.