81275A
1.REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)
Disconnect the connector and remove the license plate light cord.
75132
2.REMOVE REAR LICENSE LIGHT COVER
Remove the 5 screws and rear license light cover.
84945
3.REMOVE LUGGAGE ELECTRICAL KEY SWITCH (w/ Entry and Start System)
81270
4.REMOVE LICENSE PLATE LIGHT ASSEMBLY
Remove the 4 screws and license plate light.
75435C
5.REMOVE BACK DOOR ORNAMENT
Put protective tape around the back door ornament.
Using a moulding remover, detach the 6 claws and remove the back door ornament.
Tape the moulding remover tip before use.
| *1 | Protective Tape |
76825
6.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR
for Rear Lower License Plate Bracket Stay:
Remove the back door outside garnish protector.
for Rear License Light Cover:
Remove the back door outside garnish protector.