Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE(for Rear without Tire Carrier)
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261318 NAME PLATE(for Rear without Tire Carrier) A

EXTERIOR PANELS / TRIM  NAME PLATE(for Rear without Tire Carrier)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

When installing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body, symbol emblem or back door name plate excessively.


PROCEDURE

Hide 75741E 1.INSTALL SYMBOL EMBLEM

B236240E02
0.604,3.375 0.792,3.375 0.792,3.375 0.927,3.729 true 2.969,3.646 2.656,3.646 2.656,3.646 2.49,3.896 true 3.01,3.563 3.208,3.74 0.198,0.177 10 false *1 0.417,3.292 0.615,3.469 0.198,0.177 10 false *1

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new symbol emblem.

i.

Using a heat light, heat the vehicle body and a new symbol emblem.


ii.

Remove the peeling paper from the face of the symbol emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the boss positions and install the symbol emblem.

HINT:

Press the symbol emblem firmly to install it.


Text in Illustration
*1 Boss



Hide 75441B 2.INSTALL BACK DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door name plate.

i.

Using a heat light, heat the vehicle body and a new back door name plate.


ii.

Remove the peeling paper from the face of the back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door name plate in the position shown in the illustration.

B236243E04
4.021,0.74 4.135,0.74 4.135,0.74 4.198,1.031 false 5.854,0.792 5.74,0.792 5.74,0.792 5.604,0.896 false 3.833,2.458 3.958,2.458 3.958,2.458 4.021,2.75 false 5.865,2.521 5.74,2.521 5.74,2.521 5.615,2.635 false 3.823,1.188 4.438,1.448 0.615,0.26 10 false 78.4 mm 3.823,1.313 4.396,1.531 0.573,0.219 10 false (3.09 in.) 6,1.396 6.635,1.604 0.635,0.208 10 false 64.7 mm 6,3.115 6.635,3.323 0.635,0.208 10 false 64.7 mm 6,3.26 6.573,3.469 0.573,0.208 10 false (2.55 in.) 3.458,2.917 4.094,3.125 0.635,0.208 10 false 78.8 mm 3.469,3.063 4.042,3.24 0.573,0.177 10 false (3.10 in.) 5.333,1.146 6.073,1.323 0.74,0.177 10 true 78.4 mm 5.333,1.313 5.927,1.5 0.594,0.188 10 true (3.09 in.) 5.333,2.865 5.979,3.031 0.646,0.167 10 true 78.3 mm 5.333,3.031 5.906,3.24 0.573,0.208 10 true (3.08 in.) 3.417,0.24 3.635,0.438 0.219,0.198 10 false *a 3.865,0.656 4.083,0.854 0.219,0.198 10 false *b 5.885,0.708 6.104,0.906 0.219,0.198 10 false *c 3.677,2.375 3.896,2.573 0.219,0.198 10 false *b 5.885,2.438 6.104,2.635 0.219,0.198 10 false *c 5.99,1.542 6.573,1.792 0.583,0.25 10 false (2.55 in.)

Text in Illustration
*a Reference Values *b Back Door Relief
*c Back Door End Line - -