Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE(for Rear without Tire Carrier)
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261318 NAME PLATE(for Rear without Tire Carrier) A

EXTERIOR PANELS / TRIM  NAME PLATE(for Rear without Tire Carrier)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body, symbol emblem or back door name plate excessively.


PROCEDURE

Hide 75741E 1.REMOVE SYMBOL EMBLEM

B236239E03
0.969,0.302 1.177,0.302 1.177,0.302 1.333,0.646 false 2.292,0.365 2.135,0.365 2.135,0.365 2.042,0.802 false 0.635,3.292 0.792,3.292 0.792,3.292 0.917,3.76 true 2.594,3.948 2.906,3.948 false 2.323,0.271 2.521,0.438 0.198,0.167 10 false *1 0.792,0.219 0.99,0.385 0.198,0.167 10 false *2 2.917,3.854 3.115,4.021 0.198,0.167 10 false *3 0.448,3.219 0.646,3.385 0.198,0.167 10 false *3

a.

Put protective tape around the symbol emblem.


b.

Insert piano wire between the vehicle body and symbol emblem.

NOTICE:

Be careful of the boss positions.



c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the symbol emblem.

Text in Illustration
*1 Protective Tape
*2 Wooden Block
*3 Boss


Hide 75441B 2.REMOVE BACK DOOR NAME PLATE

B236242E03
1.927,0.427 2.094,0.427 2.094,0.427 2.208,0.771 false 2.115,1.552 2.323,1.552 2.323,1.552 2.552,1.313 false 1.948,1.469 2.146,1.646 0.198,0.177 10 false *1 1.719,0.344 1.917,0.5 0.198,0.156 10 false *2

a.

Put protective tape around the back door name plate.


b.

Insert piano wire between the vehicle body and back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the back door name plate.

Text in Illustration
*1 Protective Tape
*2 Wooden Block