Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).
63487A
1.INSTALL FRONT ROOF RACK LEG CUSHION LH
Attach the 4 claws to install the front roof rack cushion.
63489
2.INSTALL REAR ROOF RACK LEG CUSHION LH
Attach the 4 claws to install the rear roof rack cushion.
63485A
3.INSTALL CENTER ROOF RACK LEG CUSHION LH
Attach the 2 claws to install the center roof rack cushion.