Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261322 ENGINE HOOD MOULDING A

EXTERIOR PANELS / TRIM  ENGINE HOOD MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

When installing the front hood moulding pad, heat the front hood moulding surface using a heat light.


Standard:
Item Temperature
Hood Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the front hood moulding excessively.


PROCEDURE

Hide 75777E 1.INSTALL FRONT HOOD MOULDING PAD

a.

Clean the front hood moulding assembly surface.

i.

Using a heat light, heat the front hood moulding assembly surface.


ii.

Remove the double-sided tape from the front hood moulding assembly surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front hood moulding pad.

i.

Remove the peeling paper from the face of a new front hood moulding pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Install the front hood moulding pad.