Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) › 2016.08–2017.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260574 FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) G

1KD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A329762E01
0.813,2.708 1.469,2.708 false 0.729,4.469 1.438,4.469 false 0.646,2.635 0.802,2.833 0.156,0.198 10 false F 0.594,4.385 0.75,4.583 0.156,0.198 10 false E

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
Float position is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.