Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) › 2016.08–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261118 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71846A 1.REMOVE REAR SEAT UPPER RECLINING COVER LH

B237615E01
1.469,1.99 1.719,1.99 1.719,1.99 2.469,1.635 false 1.271,1.917 1.448,2.115 0.177,0.198 10 false *1

a.

Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover LH.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72526A 2.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

B237616

a.

Remove the 3 screws and reclining adjuster release handle LH.


Hide 71395B 3.REMOVE CENTER SEAT HINGE COVER LH

B237617

a.

Using a clip remover, remove the clip.


b.

Detach the 2 guides and remove the center seat hinge cover LH.


Hide 71826B 4.REMOVE REAR SEAT CUSHION MOULDING LH

B237619

a.

Using a clip remover, detach the clip.


b.

Using a moulding remover, detach the 3 claws.


c.

Move the rear seat cushion moulding LH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding LH.


Hide 72616A 5.REMOVE REAR SEATBACK LOCK STRIKER COVER LH

B237621

a.

Using a clip remover, detach the 3 clips and remove the rear seatback lock striker cover LH.


Hide 6.REMOVE SEAT CUSHION COVER WITH PAD

a.
B359313

w/ Seat Heater System:

i.

Disconnect the 2 rear seat heater connectors.


ii.
B360133

Pull out the wire harness as shown in the illustration.



b.
B237622

Detach the hooks.


c.
B237624

Detach the hook and remove the seat cushion cover with pad.


Hide 71696 7.REMOVE REAR NO. 2 SEAT PROTECTOR

B237626

a.

Remove the 2 rear No. 2 seat protectors from the separate type rear seat cushion pad.


Hide 71076S 8.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

B237627

a.

Remove the 14 hog rings and separate type rear seat cushion cover from the separate type rear seat cushion pad.


Hide 87510P 9.REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71647 10.REMOVE REAR SEAT CUSHION EDGE PROTECTOR

a.

Remove the rear seat cushion edge protector from the cushion spring.


Hide 11.REMOVE CENTER SEATBACK ASSEMBLY

B237629

a.

Remove the 2 bolts and center seatback assembly.


Hide 71960B 12.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

a.

Remove the rear seat center headrest assembly.


Hide 71397A 13.REMOVE CENTER SEAT HINGE COVER

B237630

a.

Using a clip remover, remove the clip.


b.

Detach the 2 guides and remove the center seat hinge cover.


Hide 72732 14.REMOVE REAR SEAT RECLINING BRACKET LH

B237632

a.

Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and rear seat reclining bracket LH.


Hide 72731 15.REMOVE REAR SEAT RECLINING BRACKET RH

a.

Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and rear seat reclining bracket RH.


Hide 71369B 16.REMOVE REAR SEATBACK STAY COVER LH

B237633

a.

Using a moulding remover, detach the 3 claws.


b.

Detach the guide and remove the rear seatback stay cover LH.


Hide 71349B 17.REMOVE REAR SEATBACK STAY COVER RH

a.

Using a moulding remover, detach the 3 claws.


b.

Detach the guide and remove the rear seatback stay cover RH.


Hide 72830 18.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

a.
B237634

Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes.


b.
B237635

Remove the nut and rear center seat armrest support LH.


c.
B237636

Remove the rear seat center armrest assembly as shown in the illustration.


Hide 72806B 19.REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY

a.
B237638

Remove the 2 screws.


b.
B237639

Using moulding remover A, detach the 2 claws and remove the rear seat center armrest cup holder sub-assembly.


Hide 72996A 20.REMOVE REAR SEATBACK COVER

B237641

a.

Using a screwdriver, detach the 4 claws and remove the rear seatback cover.

HINT:

Tape the screwdriver tip before use.



Hide 72665B 21.REMOVE REAR SEATBACK LOCK COVER

B237642

a.

Using a moulding remover, detach the claw.


b.

Move the cover in the direction of the arrow to detach the clip and 2 guides, and then remove the rear seatback lock cover.


Hide 71087 22.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

B237644

a.

Using a clip remover, detach the 5 clips and remove the rear seatback board sub-assembly.


Hide 72877C 23.REMOVE SEAT ARMREST COVER

a.
B237645

Detach the hooks.


b.
B237647

Remove the seat armrest cover with pad.


c.
B237650

Remove the seat armrest cover from the pad.


Hide 71931A 24.REMOVE REAR SEAT HEADREST SUPPORT

B237651

a.

Detach the 4 claws and remove the 2 rear seat headrest supports.


Hide 79157 25.REMOVE NO. 1 SEATBACK COVER

a.
B237652

Using moulding remover A, detach the 2 claws.


b.
B237654

Detach the guide and remove the No. 1 seatback cover.


Hide 72660F 26.REMOVE REAR SEAT LOCK ASSEMBLY LH

B237656

a.

Detach the clamp and disconnect the wire.


b.

Remove the 2 bolts and rear seat lock assembly LH.


Hide 72663 27.REMOVE REAR NO. 1 SEAT LOCK CONTROL LEVER

B237657

a.

Remove the rear No. 1 seat lock control lever as shown in the illustration.


Hide 79873 28.REMOVE FOLD SEATBACK WIRE

B237659

a.

Detach the 2 claws and remove the fold seatback wire.


Hide 74633A 29.REMOVE COAT HOOK CAP

B237660E01
1.71,0.087 1.940,0.280 0.230,0.193 10 *1 1.68,0.176 1.514,0.176 1.514,0.176 0.881,0.685 false

a.

Using a screwdriver, detach the 2 claws and guide, and then remove the coat hook cap.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72978 30.REMOVE CENTER NO. 2 SEATBACK COVER

B237662

a.

Remove the 3 screws and center No. 2 seatback cover.


Hide 73390C 31.REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

B237670

a.

Remove the bolt and rear No. 1 seat inner belt assembly LH and disconnect the No. 1 seat 3 point type belt assembly LH.


Hide 72572C 32.REMOVE RECLINING ADJUSTER KNOB CAP LH

B237663E01
2.738,1.099 2.968,1.292 0.230,0.193 10 *1 2.692,1.173 2.526,1.173 2.526,1.173 2.105,1.734 false

a.

Using a screwdriver, detach the claw and guide, and then remove the reclining adjuster knob cap LH.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72058A 33.REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B237665

Remove the 2 screws.


b.
B165025E07
0.646,1.146 0.896,1.385 0.25,0.24 10 false (1) 1.708,2.25 1.958,2.427 0.25,0.177 10 true (2) 1.76,2.76 2.031,2.958 0.271,0.198 10 false (3)

Disconnect the cable in the order shown in the illustration and remove the rear seat lock control lever sub-assembly LH.


Hide 73178A 34.REMOVE SEAT BELT ANCHOR COVER CAP

a.
B237666E01
0.343,0.042 0.531,0.235 0.188,0.193 10 *1 0.562,0.123 0.728,0.123 0.728,0.123 0.901,1.112 false

Using a screwdriver, detach the 2 claws and remove the seat belt anchor cover cap.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 73373 35.REMOVE REAR SEAT SHOULDER BELT COVER

a.

Disconnect the outer belt from the rear seat shoulder belt cover.


b.
B360121

Detach the 2 claws and 2 guides, and then remove the rear seat shoulder belt cover.


Hide 72996A 36.REMOVE REAR SEATBACK COVER

B237641

a.

Using a screwdriver, detach the 4 claws and remove the rear seatback cover.

HINT:

Tape the screwdriver tip before use.



Hide 71890A 37.REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

B237671

a.

Using a clip remover, detach the 7 clips and remove the rear seatback board carpet assembly LH.


Hide 71931B 38.REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

B237672

a.

Detach the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies.


Hide 39.REMOVE SEATBACK COVER WITH PAD

a.
B237673E01
1.594,0.208 1.427,0.208 1.427,0.208 1.26,0.76 false 0.708,0.406 1.427,0.208 false 1.427,0.208 0.563,0.208 false 0.625,1.615 1.646,1.615 false 1.646,0.135 1.875,0.333 0.229,0.198 10 false *1 0.406,1.51 0.604,1.708 0.198,0.198 10 false *2

Remove the 10 hog rings and detach the hooks, and then remove the seatback cover with pad.

Text in Illustration
*1 Hook
*2 Hog Ring


b.
B237676

Disconnect the outer belt from the seatback cover with pad.


c.

w/ Seat Heater System:

i.
B360132

Remove the wire harness.



Hide 71078S 40.REMOVE SEPARATE TYPE REAR SEATBACK COVER

a.
B248335

w/ Seat Heater System:

i.

Disconnect the rear seatback heater assembly wire harness from the separate type rear seatback pad.



b.
B237677

Remove the 8 hog rings and separate type rear seatback cover from the separate type rear seatback pad.


Hide 87510Q 41.REMOVE REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71697 42.REMOVE REAR SEATBACK EDGE PROTECTOR

a.

Remove the rear seatback edge protector from the rear seatback frame sub-assembly LH.


Hide 71879A 43.REMOVE REAR SEAT INNER RECLINING COVER LH

B237679

a.

Remove the 2 screws.


b.

Detach the guide and remove the rear seat inner reclining cover LH.


Hide 71876J 44.REMOVE RECLINING ADJUSTER INSIDE COVER LH

B237680

a.

Remove the 2 screws.


b.

Detach the 2 claws and remove the reclining adjuster inside cover LH.


Hide 71828B 45.REMOVE REAR SEAT REAR CUSHION MOULDING LH

B237681

a.

Using a clip remover, detach the clip.


b.

Using moulding remover A, detach the 4 claws.


c.

Move the rear seat rear cushion moulding LH in the direction of the arrow to detach the guide and remove the rear seat rear cushion moulding LH.


Hide 73949 46.REMOVE CAP

B237683

a.

Detach the 2 claws and remove the cap.


Hide 71879B 47.REMOVE REAR SEAT RECLINING COVER INNER LH

B237684

a.

Detach the claw and guide, and then remove the rear seat reclining cover inner LH.


Hide 71499C 48.REMOVE REAR SEAT CUSHION SPRING DAMPER

B237686

a.

Remove the 2 nuts and rear seat cushion spring damper.


Hide 73187A 49.REMOVE REAR SEAT SHOULDER BELT GUIDE

B237687

a.

Detach the claw and guide, and then remove the rear seat shoulder belt guide.


Hide 72704A 51.REMOVE REAR SEAT RECLINING CONTROL CABLE

a.

Cut off the 4 cable ties.

B237688


b.

Detach the 3 cable clamps and disconnect the cable, and then remove the rear seat reclining control cable.

B237689


Hide 72704B 52.REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE

a.

Detach the 3 cable clamps and disconnect the cable, and then remove the rear No. 2 seat reclining control cable.

B237690


Hide 72068 53.REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY LH

B237691

a.

Remove the 2 nuts and rear back lock control lever sub-assembly LH.


Hide 87501D 54.REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

Hide 82194 55.REMOVE REAR SEAT WIRE LH (w/ Seat Heater System)

a.
B291034

Detach the claw and disconnect the rear seat wire connector.


b.

Detach the clamp and remove the rear seat wire LH.


Hide 71018 56.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH

B237692

a.

Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts.


b.

Remove the 2 bolts and rear seatback frame sub-assembly LH.


Hide 72728 57.REMOVE REAR SEAT INNER RECLINING PROTECTOR RH

a.
B452608

Detach the claw and guide to remove the rear seat inner reclining protector RH.


Hide 71016A 58.REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH

B237694

a.

Remove the 6 nuts and rear seat cushion frame sub-assembly LH.


Hide 72173B 59.REMOVE REAR SEAT TRACK ADJUSTING HANDLE LH

B237695

a.

Slide the slide rail to the rearmost position.


b.

Using a small screwdriver, push down the handle stopper to detach the claw and remove the rear seat track adjusting handle LH.

HINT:

Insert the screwdriver into the hole shown in the illustration while looking into the hole.