Home › Engine / Hybrid System › 1KD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › 2017.08–2020.08
RM27T0E _51 Engine / Hybrid System _053669 1KD-FTV FUEL _0260573 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) A

1KD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

a.
A405462C01
0,0 0,0 false
V100135

Slide


Set the fuel sender gauge assembly on the fuel tank vent tube assembly. Then slide the fuel sender gauge downward to install it.


b.

Connect the fuel sender gauge assembly connector.


Hide 83320B 2.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
A405463C01
0,0 0,0 false
V100135

Slide


Set the fuel sender gauge assembly on the fuel gauge support. Then slide the fuel sender gauge assembly downward to install it.


b.
A405451C01
0.667,1.417 1.979,1.417 true 2.177,1.531 2.927,1.531 true 2.365,1.667 2.552,1.979 2.552,1.979 2.76,1.979 true 0.469,1.354 0.896,1.667 0.427,0.313 10 false *1 3.031,1.458 3.406,1.729 0.375,0.271 10 false *2 2.875,1.885 3.344,2.177 0.469,0.292 10 false *3
*1 Lead Wire (Pink)
*2 Lead Wire (Black)
*3 Lead Wire (Green)


Install the 3 lead wires with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)

NOTICE:

Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.



Hide 77020A 3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)

Hide 77010 4.INSTALL FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)