Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU) › from 2017.08
RM27T0E _57 Power Source / Network _053729 NETWORKING _0325854 CAN COMMUNICATION SYSTEM(w/ Central Gateway ECU) C

NETWORKING  CAN COMMUNICATION SYSTEM(w/ Central Gateway ECU)  B1003  ECU Malfunction  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B1003 ECU Malfunction A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected. Central gateway ECU (network gateway ECU) Central gateway ECU (network gateway ECU)

PROCEDURE

1.RECONFIRM DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.


Result:
Result Proceed to
DTC B1003 is not output from the central gateway ECU (network gateway ECU) A
DTC B1003 is output from the central gateway ECU (network gateway ECU) B



A

B

REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)