81080E
1.INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Front Door Inside Handle Illumination Light Assembly LH) |
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (+)
Battery negative (-) → Terminal 1 (-) |
LED illuminates |
If the result is not as specified, replace the front door inside handle illumination light assembly LH.
81080D
2.INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Front Door Inside Handle Illumination Light Assembly RH) |
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (+)
Battery negative (-) → Terminal 1 (-) |
LED illuminates |
If the result is not as specified, replace the front door inside handle illumination light assembly RH.
81080L
3.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly LH) |
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly LH.
81080H
4.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH
| *a | Component without harness connected
(No. 1 Interior Illumination Light Assembly RH) |
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E) |
LED illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly RH.