Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Halogen Headlight) › from 2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261276 HEADLIGHT ASSEMBLY(for Halogen Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Halogen Headlight)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81110B 1.REMOVE NO. 1 HEADLIGHT BULB

a.
E375658

Disconnect the connector.


b.
E375659

Turn the No. 1 headlight bulb counterclockwise until the bulb stops and remove it.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



Hide 81110D 2.REMOVE NO. 2 HEADLIGHT BULB

a.
E375657

Disconnect the connector.


b.
E375661

Turn the No. 2 headlight bulb counterclockwise until the bulb stops and remove it.

NOTICE:

Do not touch the glass part of the No. 2 headlight bulb.



Hide 81610F 3.REMOVE CLEARANCE LIGHT BULB

a.
E375655

Disconnect the connector.


b.
E375652C01
1.917,1.167 2.177,1.615 true 1.927,3.552 2.26,3.729 true 2.146,1.646 2.458,1.802 0.313,0.156 10 false *a 2.313,3.677 2.625,3.833 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark


Turn the clearance light bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the clearance light bulb socket.


c.
E375656

Remove the clearance light bulb from the clearance light bulb socket.


Hide 81510C 4.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E375649

Disconnect the connector.


b.
E375650C01
1.667,0.865 2.188,0.865 true 0.688,3.156 1.438,3.458 true 2.24,0.771 2.552,0.927 0.313,0.156 10 false *a 0.5,3.052 0.813,3.208 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark


Turn the front turn signal light bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the front turn signal light bulb socket.


c.
E375654

Remove the front turn signal light bulb from the front turn signal light bulb socket.


Hide 85662 5.REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Headlight Leveling)

a.
E375666

Disconnect the connector.


b.
E375667C01
1.052,1.802 1.781,0.958 true 0.927,1.813 1.24,1.969 0.313,0.156 10 false *a
*a Aiming Screw


Loosen the aiming screw 20 rotations.


c.

Turn the headlight leveling motor LH counterclockwise until it stops.

NOTICE:
·

Do not pull excessively as the headlight unit and headlight leveling motor LH are connected at this time.

·

Turn while holding with one hand as the headlight leveling motor LH may jump out.

·

If the headlight leveling motor LH is removed, make sure to replace the headlight leveling motor base packing with a new one.



HINT:

For the headlight assembly RH, turn the headlight leveling motor RH clockwise.



d.

Loosen the aiming screw until it disconnected.

HINT:

Count and record the number of rotations before the headlight leveling motor LH are disconnected.



Hide 85669 6.REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)

a.
E229723

Remove the headlight leveling motor base packing.


Hide 81125 7.REMOVE HEADLIGHT CORD

a.
E379776C01
1.083,2.448 1.396,2.604 0.313,0.156 10 false *a
*a Hook


Detach the 6 wire harness clamps.


b.

Remove the 2 screws.


c.

Detach the hook and remove the headlight cord.


Hide 52134I 8.REMOVE FRONT BUMPER BAR REINFORCEMENT LH

a.
E375663

Remove the 2 screws and front bumper bar reinforcement LH.


Hide 81192 9.REMOVE HEADLIGHT SEAL

a.
E375665

Remove the headlight seal.

NOTICE:

The headlight seal must not be reused.



Hide 53246B 10.REMOVE HEADLIGHT BRACKET LH

a.
E375664

Remove the 3 screws.


b.

Detach the claw and remove the headlight bracket LH.