Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261279 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81550L 1.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E375413

Turn the bulb socket counterclockwise until it stops to disconnect the bulb socket.


b.
E375415

Remove the rear turn signal light bulb from the bulb socket.


Hide 81550N 2.REMOVE BACK UP LIGHT BULB

a.
E375410C01
2.042,1.094 2.448,1.375 true 2.104,3.229 2.469,2.948 true 2.5,1.323 2.813,1.479 0.313,0.156 10 false *a 2.5,2.844 2.813,3 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark


Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


b.
E375412

Remove the back up light bulb from the bulb socket.


Hide 52563D 3.REMOVE UPPER REAR BUMPER RETAINER LH

a.
E265515

Detach the 2 guides and remove the upper rear bumper retainer LH.


Hide 81536A 4.REMOVE REAR COMBINATION LIGHT LED

HINT:

Use the same procedure to remove the rear combination light LED on the other side.


a.
E375416

Disconnect the connector.


b.

Remove the screw.


c.
E375417C01
1.635,1.667 1.563,1.354 true 1.594,4.167 1.896,3.865 true 1.594,1.688 1.906,1.844 0.313,0.156 10 false *a 1.458,4.177 1.771,4.333 0.313,0.156 10 false *b
*a Matchmark
*b Unlock Position Mark


Turn the rear combination light LED counterclockwise until the matchmark is aligned with the unlock position mark to remove the rear combination light LED.


Hide 81565 5.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.
E375419

Detach the claw and disconnect the connector.


b.

Detach the 5 wire harness clamps and remove the rear combination light socket and wire sub-assembly LH.