Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0261279 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH

a.

Connect the connector.


b.

Attach the 5 wire harness clamps to install the rear combination light socket and wire sub-assembly LH.


Hide 81536A 2.INSTALL REAR COMBINATION LIGHT LED

HINT:

Use the same procedure to install the rear combination light LED on the other side.


a.
E375418C01
1.865,1.406 1.365,1.604 true 1.896,1.5 1.635,1.719 true 1.5,3.813 0.563,3.813 true 1.167,1.542 1.479,1.698 0.313,0.156 10 false *a 1.5,1.698 1.813,1.854 0.313,0.156 10 false *b 0.354,3.729 0.667,3.885 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark


Align the matchmark of the rear combination light LED with the unlock position mark, and then rotate the rear combination light LED clockwise until the lock position mark to install the rear combination light LED.


b.

Connect the connector.


Hide 52563D 3.INSTALL UPPER REAR BUMPER RETAINER LH

a.

Attach the 2 guides to install the upper rear bumper retainer LH.


Hide 81550N 4.INSTALL BACK UP LIGHT BULB

a.

Install the back up light bulb to the bulb socket.


b.
E375411C01
2.313,1.344 1.948,0.885 true 2.531,0.625 2.104,0.698 true 2.729,3.74 2.292,3.615 true 2.375,1.313 2.688,1.469 0.313,0.156 10 false *a 2.604,0.552 2.917,0.708 0.313,0.156 10 false *b 2.792,3.677 3.104,3.833 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark


Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.


Hide 81550L 5.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the bulb socket.


b.
E375414

Insert and turn the bulb socket until it stops to connect it.