Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR › from 2017.08
RM27T0E _59 Vehicle Exterior _053745 MIRROR (EXT) _0261253 OUTER REAR VIEW MIRROR G

MIRROR (EXT)  OUTER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87940 1.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Reverse Shift-linked Mirror)

a.
B486156C05
0.76,2.792 1.229,2.792 true 0.708,2.594 1.229,2.646 true 1.375,3.188 1.344,2.833 true 0.417,2.479 0.875,2.677 0.458,0.198 10 false MV 0.417,2.708 0.875,2.906 0.458,0.198 10 false MH 1.26,3.229 1.719,3.427 0.458,0.198 10 false M+ 0.219,2.021 0.531,2.219 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


Apply battery voltage and check the operation of the mirror.

OK:
Battery Connection Specified Condition
Battery positive (+) - 1 (MV)
Battery negative (-) - 10 (M+)
Turns upward
Battery positive (+) - 10 (M+)
Battery negative (-) - 1 (MV)
Turns downward
Battery positive (+) - 10 (M+)
Battery negative (-) - 9 (MH)
Turns right
Battery positive (+) - 9 (MH)
Battery negative (-) - 10 (M+)
Turns left


If the result is not as specified, replace the outer rear view mirror assembly LH.


b.
B486157C07
0.948,3.719 1.5,4.052 true 0.958,4.396 1.5,4.208 true 0.656,3.635 1.115,3.833 0.458,0.198 10 false MR 0.667,4.333 1.125,4.531 0.458,0.198 10 false MF 1.635,0.042 2.094,0.24 0.458,0.198 10 false *a 1.083,1.25 1.542,1.448 0.458,0.198 10 false *b 1.25,2.146 1.708,2.344 0.458,0.198 10 false *c 1.74,2.552 2.198,2.75 0.458,0.198 10 false *d 2.313,2.844 2.771,3.042 0.458,0.198 10 false *e 0.271,3.208 0.583,3.406 0.313,0.198 10 false *f
*a (A) Forward position
*b (B)
*c (C) Driving position
*d (D)
*e (E) Retracted position
*f Component without harness connected
(Outer Rear View Mirror Assembly LH)


for each position:

Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Battery Connection Mirror Position Specified Condition
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Forward position (A) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Position between forward position (A) and driving position (C) Moves from (B) to (A)
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Driving position (C) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Position between driving position (C) and retracted position (E) Moves from (D) to (C)
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Retracted position (E) Does not move
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Retracted position (E) Moves from (E) to (C)


NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.


·

Do not apply battery voltage when moving the mirror by hand into each mirror position.



If the result is not as specified, replace the outer rear view mirror assembly LH.


c.
B486158C03
1.021,2.698 1.563,2.656 true 1.531,2.833 1.292,3.125 true 0.615,2.594 1.229,2.792 0.615,0.198 10 false HTR+ 1.135,3.156 1.75,3.354 0.615,0.198 10 false HTR- 0.323,1.938 0.635,2.135 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


w/ Mirror Heater:

Check the mirror heater.

i.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (HTR+) - 12 (HTR-) 25°C (75°F) 3.0 to 3.9 Ω


If the result is not as specified, replace the outer rear view mirror assembly LH.


ii.

Apply battery voltage and check the operation of the mirror heater.

OK:
Battery Connection Specified Condition
Battery positive (+) - 4 (HTR+)
Battery negative (-) - 12 (HTR-)
Mirror becomes warm


HINT:

It will take a short time for the mirror to become warm.


If the result is not as specified, inspect the outer mirror glass LH.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER REAR VIEW MIRROR GLASS>INSPECTION



d.
B487974C01
1,1.302 1.427,1.281 true 1.688,1.771 1.677,1.448 true 1.563,1.844 2.177,2.042 0.615,0.198 10 false HTR- 0.583,1.208 1.198,1.406 0.615,0.198 10 false LP+ 0.625,0.448 0.938,0.646 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


w/ Foot Light:

Check the foot light LH.

i.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Battery Connection Specified Condition
Battery positive (+) - 2 (LP+)
Battery negative (-) - 12 (HTR-)
Outer mirror light illuminates


If the result is not as specified, replace the outer rear view mirror assembly LH.



Hide 87910 2.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Reverse Shift-linked Mirror)

B486159C01
0.833,2.583 1.229,2.667 true 0.927,2.948 1.219,2.844 true 1.281,3.125 1.354,2.854 true 0.5,2.469 0.958,2.667 0.458,0.198 10 false MV 0.521,2.927 0.979,3.125 0.458,0.198 10 false MH 1.094,3.135 1.552,3.333 0.458,0.198 10 false M+ 0.229,1.969 0.542,2.167 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


a.

Apply battery voltage and check the operation of the mirror.

OK:
Battery Connection Specified Condition
Battery positive (+) - 1 (MV)
Battery negative (-) - 10 (M+)
Turns upward
Battery positive (+) - 10 (M+)
Battery negative (-) - 1 (MV)
Turns downward
Battery positive (+) - 9 (MH)
Battery negative (-) - 10 (M+)
Turns left
Battery positive (+) - 10 (M+)
Battery negative (-) - 9 (MH)
Turns right


If the result is not as specified, replace the outer rear view mirror assembly RH.


b.
B486160C07
0.958,3.573 1.521,4.01 true 0.927,4.281 1.5,4.177 true 0.625,3.49 1.083,3.688 0.458,0.198 10 false MR 0.604,4.208 1.063,4.406 0.458,0.198 10 false MF 1.823,0.052 2.281,0.25 0.458,0.198 10 false *a 2.083,1.073 2.542,1.271 0.458,0.198 10 false *b 1.896,2.115 2.354,2.313 0.458,0.198 10 false *c 1.396,2.427 1.854,2.625 0.458,0.198 10 false *d 0.802,2.75 1.26,2.948 0.458,0.198 10 false *e 0.198,3.135 0.51,3.333 0.313,0.198 10 false *f
*a (A) Forward position
*b (B)
*c (C) Driving position
*d (D)
*e (E) Retracted position
*f Component without harness connected
(Outer Rear View Mirror Assembly RH)


for each position:

Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Battery Connection Mirror Position Specified Condition
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Forward position (A) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Position between forward position (A) and driving position (C) Moves from (B) to (A)
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Driving position (C) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to (E)
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Position between driving position (C) and retracted position (E) Moves from (D) to (C)
Battery positive (+) - 3 (MR)
Battery negative (-) - 11 (MF)
Retracted position (E) Does not move
Battery positive (+) - 11 (MF)
Battery negative (-) - 3 (MR)
Retracted position (E) Moves from (E) to (C)


NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.


·

Do not apply battery voltage when moving the mirror by hand into each mirror position.



If the result is not as specified, replace the outer rear view mirror assembly RH.


c.
B486161C01
0.938,3.146 1.563,2.823 true 0.927,2.583 1.531,2.635 true 0.479,2.5 1.25,2.698 0.771,0.198 10 false HTR+ 0.521,3.042 1.292,3.24 0.771,0.198 10 false HTR- 0.281,2.052 0.594,2.25 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


w/ Mirror Heater:

Check the mirror heater.

i.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (HTR+) - 12 (HTR-) 25°C (75°F) 3.0 to 3.9 Ω


If the result is not as specified, replace the outer rear view mirror assembly RH.


ii.

Apply battery voltage and check the operation of the mirror heater.

OK:
Battery Connection Specified Condition
Battery positive (+) - 4 (HTR+)
Battery negative (-) - 12 (HTR-)
Mirror becomes warm


HINT:

It will take a short time for the mirror to become warm.


If the result is not as specified, inspect the outer mirror glass RH.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER REAR VIEW MIRROR GLASS>INSPECTION



d.
B487974C02
0.875,1.271 1.427,1.26 true 1.104,1.833 1.677,1.448 true 0.469,0.25 0.781,0.448 0.313,0.198 10 false *a 0.5,1.188 0.958,1.385 0.458,0.198 10 false LP+ 0.948,1.875 1.563,2.073 0.615,0.198 10 false HTR-
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


w/ Foot Light:

Check the foot light RH.

i.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Battery Connection Specified Condition
Battery positive (+) - 2 (LP+)
Battery negative (-) - 12 (HTR-)
Outer mirror light illuminates


If the result is not as specified, replace the outer rear view mirror assembly RH.



Hide 87940 3.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Reverse Shift-linked Mirror)

B199929C06
1.865,2.677 2.135,1.917 2.135,1.917 2.552,1.917 true 1.969,2.677 2.271,2.229 2.271,2.229 2.542,2.229 true 2.094,2.667 2.375,2.521 2.375,2.521 2.531,2.521 true 0.552,1.833 0.802,2.01 0.25,0.177 10 false *a 2.573,2.438 2.958,2.771 0.385,0.333 10 false MV 2.563,2.146 2.792,2.292 0.229,0.146 10 false M+ 2.563,1.833 2.833,1.979 0.271,0.146 10 false MH
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


a.

Apply battery voltage and check the operation of the mirror.

OK:
Battery Connection Specified Condition
Battery positive (+) - 6 (MV)
Battery negative (-) - 5 (M+)
Turns upward
Battery positive (+) - 5 (M+)
Battery negative (-) - 6 (MV)
Turns downward
Battery positive (+) - 4 (MH)
Battery negative (-) - 5 (M+)
Turns left
Battery positive (+) - 5 (M+)
Battery negative (-) - 4 (MH)
Turns right


If the result is not as specified, replace the outer mirror actuator assembly LH or outer mirror retractor LH.


b.
B199933C21
1.563,2.729 1.49,2.594 1.49,2.594 0.875,2.594 true 1.563,2.917 1.521,3.042 1.521,3.042 0.875,3.042 true 0.885,2.052 1.115,2.24 0.229,0.188 10 false *f 0.583,2.479 0.896,2.667 0.313,0.188 10 false MR 0.573,2.938 0.802,3.125 0.229,0.188 10 false MF 1.156,0 1.396,0.25 0.24,0.25 10 false :a 0.865,0.76 1.104,1.01 0.24,0.25 10 false *b 0.979,1.531 1.219,1.781 0.24,0.25 10 false *c 1.396,1.792 1.635,2.042 0.24,0.25 10 false *d 1.76,1.979 2,2.229 0.24,0.25 10 false *e
*a (A) Forward position
*b (B)
*c (C) Driving position
*d (D)
*e (E) Retracted position
*f Component without harness connected
(Outer Rear View Mirror Assembly LH)


for each position:

Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Battery Connection Mirror Position Specified Condition
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Forward position (A) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Position between forward position (A) and driving position (C) Moves from (B) to (A)
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Driving position (C) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Position between driving position (C) and retracted position (E) Moves from (D) to (C)
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Retracted position (E) Does not move
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Retracted position (E) Moves from (E) to (C)


NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.


·

Do not apply battery voltage when moving the mirror by hand into each mirror position.



If the result is not as specified, replace the outer mirror actuator assembly LH or outer mirror retractor LH.


c.
B242855C03
1.375,2.719 1.208,2.552 1.208,2.552 0.917,2.552 true 1.375,2.885 1.188,3.135 1.188,3.135 0.917,3.135 true 0.448,1.875 0.771,2.219 0.323,0.344 10 false *a 0.802,2.469 0.958,2.635 0.156,0.167 10 false + 0.792,3.042 0.896,3.24 0.104,0.198 10 false -
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


w/ Mirror heater:

Check the mirror heater.

i.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (+) - 8 (-) 25°C (75°F) 3.0 to 3.9 Ω


If the result is not as specified, replace the outer mirror glass LH or outer mirror retractor LH.


ii.

Apply battery voltage and check the operation of the mirror heater.

OK:
Battery Connection Specified Condition
Battery positive (+) - 2 (+)
Battery negative (-) - 8 (-)
Mirror becomes warm


HINT:

It will take a short time for the mirror to become warm.


If the result is not as specified, inspect the outer mirror glass LH.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER REAR VIEW MIRROR GLASS>INSPECTION



Hide 87910 4.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Reverse Shift-linked Mirror)

B199928C08
1.885,2.667 2.156,1.958 2.156,1.958 2.552,1.958 true 1.979,2.677 2.281,2.271 2.281,2.271 2.542,2.271 true 2.094,2.667 2.396,2.594 2.396,2.594 2.573,2.594 true 0.531,1.896 0.781,2.073 0.25,0.177 10 false *a 2.573,2.521 3.042,2.865 0.469,0.344 10 false MV 2.573,2.177 2.802,2.323 0.229,0.146 10 false M+ 2.573,1.865 2.844,2.01 0.271,0.146 10 false MH
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


a.

Apply battery voltage and check the operation of the mirror.

OK:
Battery Connection Specified Condition
Battery positive (+) - 6 (MV)
Battery negative (-) - 5 (M+)
Turns upward
Battery positive (+) - 5 (M+)
Battery negative (-) - 6 (MV)
Turns downward
Battery positive (+) - 5 (M+)
Battery negative (-) - 4 (MH)
Turns right
Battery positive (+) - 4 (MH)
Battery negative (-) - 5 (M+)
Turns left


If the result is not as specified, replace the outer mirror actuator assembly RH or outer mirror retractor RH.


b.
B199932C23
1.552,2.771 1.479,2.635 1.479,2.635 0.896,2.635 true 1.563,2.938 1.521,3.125 1.521,3.125 0.906,3.125 true 0.76,2.042 0.99,2.229 0.229,0.188 10 false *f 0.594,2.542 0.906,2.729 0.313,0.188 10 false MR 0.583,3.021 0.813,3.208 0.229,0.188 10 false MF 2.042,0 2.281,0.25 0.24,0.25 10 false *a 2.354,0.729 2.594,0.979 0.24,0.25 10 false *b 2.177,1.604 2.417,1.854 0.24,0.25 10 false *c 1.76,1.875 2,2.125 0.24,0.25 10 false *d 1.354,2.073 1.594,2.323 0.24,0.25 10 false *e
*a (A) Forward position
*b (B)
*c (C) Driving position
*d (D)
*e (E) Retracted position
*f Component without harness connected
(Outer Rear View Mirror Assembly RH)


for each position:

Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Battery Connection Mirror Position Specified Condition
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Forward position (A) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Position between forward position (A) and driving position (C) Moves from (B) to (A)
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Driving position (C) Does not move
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to (E)
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Position between driving position (C) and retracted position (E) Moves from (D) to (C)
Battery positive (+) - 3 (MR)
Battery negative (-) - 9 (MF)
Retracted position (E) Does not move
Battery positive (+) - 9 (MF)
Battery negative (-) - 3 (MR)
Retracted position (E) Moves from (E) to (C)


NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.


·

Do not apply battery voltage when moving the mirror by hand into each mirror position.



If the result is not as specified, replace the outer mirror actuator assembly RH or outer mirror retractor RH.


c.
B242856C03
1.396,2.667 1.24,2.438 1.24,2.438 0.958,2.438 true 1.396,2.833 1.208,3.094 1.208,3.094 0.958,3.094 true 0.417,1.792 0.74,2.135 0.323,0.344 10 false *a 0.833,2.323 0.99,2.49 0.156,0.167 10 false + 0.865,2.99 0.969,3.188 0.104,0.198 10 false -
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


w/ Mirror Heater:

Check the mirror heater.

i.

Measure the resistance according to the value (s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (+) - 8 (-) 25°C (75°F) 3.0 to 3.9 Ω


If the result is not as specified, replace the outer mirror glass RH or outer mirror retractor RH.


ii.

Apply battery voltage and check the operation of the mirror heater.

OK:
Battery Connection Specified Condition
Battery positive (+) - 2 (+)
Battery negative (-) - 8 (-)
Mirror becomes warm


HINT:

It will take a short time for the mirror to become warm.


If the result is not as specified, inspect the outer mirror glass RH.

Click hereVehicle Exterior>MIRROR (EXT)>OUTER REAR VIEW MIRROR GLASS>INSPECTION