Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/o Entry and Start System) › from 2017.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0261046 DOOR CONTROL TRANSMITTER(w/o Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/o Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745A 1.INSTALL TRANSMITTER BATTERY (except Separate Type)

a.
B318050

Install the transmitter battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter battery case free of dust and oil.




b.
B318051

Attach the 7 claws to install the transmitter battery cover.


Hide 89071B 2.INSTALL DOOR CONTROL TRANSMITTER MODULE SET (except Separate Type)

a.
B318052

Install the door control transmitter module set to the transmitter housing case from directly above.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

The switches may not be able to operate normally when the door control transmitter module set is installed with keeping its rubber projections bent.




Hide 89751A 3.INSTALL TRANSMITTER HOUSING COVER (except Separate Type)

a.
B268614

Install the transmitter housing cover onto the transmitter housing case securely.


Hide 89745E 4.INSTALL TRANSMITTER BATTERY (for Separate Type)

a.
B239792

Install the transmitter battery (lithium battery: CR2032) with the positive (+) side up, as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing case free of dust and oil.




b.

Install the transmitter housing cover.


c.

Press one of the transmitter switches and check that the LED illuminates.