ILLUMINATED ENTRY SYSTEM
The illuminated entry system has the following control functions:
| Control | Outline | Lights that Operate |
|---|---|---|
| Door Lock/Unlock-linked | When any door is unlocked, the lights that operate turn on. | ·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly |
| When all the doors are locked, the lights that operate turn off. | ||
| Door Open/Close-linked | When any door is opened, the lights that operate turn on. | ·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly |
| When the ignition switch is turned to ACC or ON and all doors are closed, the lights that operate turn off. | ·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly |
|
| Ignition Switch-linked | When the ignition switch is turned from ACC or ON to off, the lights that operate turn on. | ·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly |
BATTERY SAVING CONTROL SYSTEM
The battery saving control system has the following control functions:
| Control | Outline | Lights that Operate |
|---|---|---|
| Basic function | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly |
| Interior light auto cut function | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Map light assembly ·
No. 1 room light assembly ·
No. 2 room light assembly ·
Transponder key coil |