Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX(for Automatic Transmission) › from 2017.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261214 FRONT CONSOLE BOX(for Automatic Transmission) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(for Automatic Transmission)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84010A 1.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

Hide 55436A 2.REMOVE INSTRUMENT PANEL FINISH PANEL END LH

B486199

a.

Detach the 5 clips and remove the instrument panel finish panel end LH.


b.

w/ Entry and Start System:

i.

Disconnect the connector.



Hide 55449C 3.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

B486200

a.

Detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.


Hide 55435A 4.REMOVE INSTRUMENT PANEL FINISH PANEL END RH

B486201

a.

Detach the 5 clips and remove the instrument panel finish panel end RH.


b.

w/ Airbag Cut Off Switch:

i.

Disconnect the connector.



Hide 55448A 5.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

HINT:

Use the same procedure described for the No. 2 instrument panel finish panel cushion.


Hide 58805E 6.REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY (w/o Module Switch)

a.

w/ Combination Switch:

i.
B486202

Detach the 10 clips and remove the lower console panel sub-assembly.


ii.

Disconnect each connector.



b.

w/o Combination Switch:

i.
B486203

Detach the 10 clips and remove the lower console panel sub-assembly.


ii.

Disconnect each connector.



Hide 55405B 7.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Module Switch)

a.
B486204

Detach the 4 clips and remove the center instrument cluster finish panel sub-assembly.


Hide 55606 8.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

B356218

a.

for LHD:

i.

Remove the screw.


ii.

Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.


iii.

Disconnect each connector.



b.
B298554

for RHD:

i.

Remove the screw.


ii.

Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.


iii.

Disconnect each connector.



Hide 58816B 9.REMOVE CONSOLE BOX INSERT

B238139

a.

Detach the 2 clips and guide and remove the console box insert.


Hide 55607 10.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Remove the screw.


b.

Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover sub-assembly.

B298555C02
3.708,0.031 3.948,0.25 0.24,0.219 12 false *B 0.406,0.031 0.646,0.25 0.24,0.219 12 false *A
*A for LHD *B for RHD



Hide 58817A 11.REMOVE FRONT NO. 2 CONSOLE BOX INSERT

B238145

a.

Detach the 2 clips and guide and remove the front No. 2 console box insert.


Hide 33504F 12.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

B486205C01
1.802,1.135 2.208,1.135 true 2.26,1.063 2.573,1.26 0.313,0.198 10 false *1
*1 Shifting Hole Cover


a.

Move the shifting hole cover downward.


b.

Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.


Hide 13.REMOVE CONSOLE PANEL SUB-ASSEMBLY

B486206C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the console panel sub-assembly.


b.

Using a moulding remover, detach the 8 clips and 2 claws.


c.

Disconnect each connector and remove the console panel sub-assembly.


Hide 55084E 14.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

B238153

a.

Detach the 4 claws.


b.

Disconnect the 2 clamps and remove the No. 1 heater to register duct sub-assembly.


Hide 58861B 15.REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

B363311

a.

Remove the clip and No. 1 console box duct.


Hide 58903A 16.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

B238142

a.

Detach the 4 clips and 4 claws.


b.

Disconnect each connector and remove the rear console end panel sub-assembly.


Hide 58910C 17.REMOVE REAR CONSOLE BOX ASSEMBLY

B363312

a.

Remove the 2 screws, clip and 5 bolts.


b.

Disconnect each connector and remove the rear console box assembly.